Gkphp/Library/Traits/Psr4/Zxing/qrcode/detectorAlignmentPatternFinder.php

<?php
/*
 * Copyright 2007 ZXing authors
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

namespace Zxing\Qrcode\Detector;

use Zxing\NotFoundException;
use Zxing\ResultPointCallback;
use Zxing\Common\BitMatrix;


/**
 * <p>This class attempts to find alignment patterns in a QR Code. Alignment patterns look like finder
 * patterns but are smaller and appear at regular intervals throughout the image.</p>
 *
 * <p>At the moment this only looks for the bottom-right alignment pattern.</p>
 *
 * <p>This is mostly a simplified copy of {@link FinderPatternFinder}. It is copied,
 * pasted and stripped down here for maximum performance but does unfortunately duplicate
 * some code.</p>
 *
 * <p>This class is thread-safe but not reentrant. Each thread must allocate its own object.</p>
 *
 * @author Sean Owen
 */
final class AlignmentPatternFinder {

    private $image;
    private $possibleCenters;
    private $startX;
    private $startY;
    private $width;
    private $height;
    private $moduleSize;
    private $crossCheckStateCount;
    private $resultPointCallback;

    /**
     * <p>Creates a finder that will look in a portion of the whole image.</p>
     *
     * @param image image to search
     * @param startX left column from which to start searching
     * @param startY top row from which to start searching
     * @param width width of region to search
     * @param height height of region to search
     * @param moduleSize estimated module size so far
     */
    function __construct($image,
                         $startX,
                         $startY,
                         $width,
                         $height,
                         $moduleSize,
                         $resultPointCallback) {
        $this->image = $image;
        $this->possibleCenters = array();
        $this->startX = $startX;
        $this->startY = $startY;
        $this->width = $width;
        $this->height = $height;
        $this->moduleSize = $moduleSize;
        $this->crossCheckStateCount = array();
        $this->resultPointCallback = $resultPointCallback;
    }

    /**
     * <p>This method attempts to find the bottom-right alignment pattern in the image. It is a bit messy since
     * it's pretty performance-critical and so is written to be fast foremost.</p>
     *
     * @return {@link AlignmentPattern} if found
     * @throws NotFoundException if not found
     */
    function find()  {
        $startX = $this->startX;
        $height = $this->height;
        $maxJ = $startX + $this->width;
        $middleI = $this->startY + ($height / 2);
        // We are looking for black/white/black modules in 1:1:1 ratio;
        // this tracks the number of black/white/black modules seen so far
        $stateCount = array();
        for ($iGen = 0; $iGen < $height; $iGen++) {
            // Search from middle outwards
            $i = $middleI + (($iGen & 0x01) == 0 ? ($iGen + 1) / 2 : -(($iGen + 1) / 2));
            $i = intval($i);
            $stateCount[0] = 0;
            $stateCount[1] = 0;
            $stateCount[2] = 0;
            $j = $startX;
            // Burn off leading white pixels before anything else; if we start in the middle of
            // a white run, it doesn't make sense to count its length, since we don't know if the
            // white run continued to the left of the start point
            while ($j < $maxJ && !$this->image->get($j, $i)) {
                $j++;
            }
            $currentState = 0;
            while ($j < $maxJ) {
                if ($this->image->get($j, $i)) {
                    // Black pixel
                    if ($currentState == 1) { // Counting black pixels
                        $stateCount[$currentState]++;
                    } else { // Counting white pixels
                        if ($currentState == 2) { // A winner?
                            if ($this->foundPatternCross($stateCount)) { // Yes
                                $confirmed = $this->handlePossibleCenter($stateCount, $i, $j);
                                if ($confirmed != null) {
                                    return $confirmed;
                                }
                            }
                            $stateCount[0] = $stateCount[2];
                            $stateCount[1] = 1;
                            $stateCount[2] = 0;
                            $currentState = 1;
                        } else {
                            $stateCount[++$currentState]++;
                        }
                    }
                } else { // White pixel
                    if ($currentState == 1) { // Counting black pixels
                        $currentState++;
                    }
                    $stateCount[$currentState]++;
                }
                $j++;
            }
            if ($this->foundPatternCross($stateCount)) {
                $confirmed = $this->handlePossibleCenter($stateCount, $i, $maxJ);
                if ($confirmed != null) {
                    return $confirmed;
                }
            }

        }

        // Hmm, nothing we saw was observed and confirmed twice. If we had
        // any guess at all, return it.
        if (count($this->possibleCenters)) {
            return $this->possibleCenters[0];
        }

        throw  NotFoundException::getNotFoundInstance();
    }

    /**
     * Given a count of black/white/black pixels just seen and an end position,
     * figures the location of the center of this black/white/black run.
     */
    private static function centerFromEnd($stateCount, $end) {
        return (float) ($end - $stateCount[2]) - $stateCount[1] / 2.0;
    }

    /**
     * @param stateCount count of black/white/black pixels just read
     * @return true iff the proportions of the counts is close enough to the 1/1/1 ratios
     *         used by alignment patterns to be considered a match
     */
    private function foundPatternCross($stateCount) {
        $moduleSize = $this->moduleSize;
        $maxVariance = $moduleSize / 2.0;
        for ($i = 0; $i < 3; $i++) {
            if (abs($moduleSize - $stateCount[$i]) >= $maxVariance) {
                return false;
            }
        }
        return true;
    }

    /**
     * <p>After a horizontal scan finds a potential alignment pattern, this method
     * "cross-checks" by scanning down vertically through the center of the possible
     * alignment pattern to see if the same proportion is detected.</p>
     *
     * @param startI row where an alignment pattern was detected
     * @param centerJ center of the section that appears to cross an alignment pattern
     * @param maxCount maximum reasonable number of modules that should be
     * observed in any reading state, based on the results of the horizontal scan
     * @return vertical center of alignment pattern, or {@link Float#NaN} if not found
     */
    private function crossCheckVertical($startI, $centerJ, $maxCount,
                                        $originalStateCountTotal) {
        $image = $this->image;

        $maxI = $image->getHeight();
        $stateCount = $this->crossCheckStateCount;
        $stateCount[0] = 0;
        $stateCount[1] = 0;
        $stateCount[2] = 0;

        // Start counting up from center
        $i = $startI;
        while ($i >= 0 && $image->get($centerJ, $i) && $stateCount[1] <= $maxCount) {
            $stateCount[1]++;
            $i--;
        }
        // If already too many modules in this state or ran off the edge:
        if ($i < 0 || $stateCount[1] > $maxCount) {
            return NAN;
        }
        while ($i >= 0 && !$image->get($centerJ, $i) && $stateCount[0] <= $maxCount) {
            $stateCount[0]++;
            $i--;
        }
        if ($stateCount[0] > $maxCount) {
            return NAN;
        }

        // Now also count down from center
        $i = $startI + 1;
        while ($i < $maxI && $image->get($centerJ, $i) && $stateCount[1] <= $maxCount) {
            $stateCount[1]++;
            $i++;
        }
        if ($i == $maxI || $stateCount[1] > $maxCount) {
            return NAN;
        }
        while ($i < $maxI && !$image->get($centerJ, $i) && $stateCount[2] <= $maxCount) {
            $stateCount[2]++;
            $i++;
        }
        if ($stateCount[2] > $maxCount) {
            return NAN;
        }

        $stateCountTotal = $stateCount[0] + $stateCount[1] + $stateCount[2];
        if (5 * abs($stateCountTotal - $originalStateCountTotal) >= 2 * $originalStateCountTotal) {
            return NAN;
        }

        return $this->foundPatternCross($stateCount) ? $this->centerFromEnd($stateCount, $i) : NAN;
    }

    /**
     * <p>This is called when a horizontal scan finds a possible alignment pattern. It will
     * cross check with a vertical scan, and if successful, will see if this pattern had been
     * found on a previous horizontal scan. If so, we consider it confirmed and conclude we have
     * found the alignment pattern.</p>
     *
     * @param stateCount reading state module counts from horizontal scan
     * @param i row where alignment pattern may be found
     * @param j end of possible alignment pattern in row
     * @return {@link AlignmentPattern} if we have found the same pattern twice, or null if not
     */
    private function handlePossibleCenter($stateCount, $i, $j) {
        $stateCountTotal = $stateCount[0] + $stateCount[1] + $stateCount[2];
        $centerJ = $this->centerFromEnd($stateCount, $j);
        $centerI = $this->crossCheckVertical($i, (int) $centerJ, 2 * $stateCount[1], $stateCountTotal);
        if (!is_nan($centerI)) {
            $estimatedModuleSize = (float) ($stateCount[0] + $stateCount[1] + $stateCount[2]) / 3.0;
            foreach ($this->possibleCenters as $center) {
                // Look for about the same center and module size:
                if ($center->aboutEquals($estimatedModuleSize, $centerI, $centerJ)) {
                    return $center->combineEstimate($centerI, $centerJ, $estimatedModuleSize);
                }
            }
            // Hadn't found this before; save it
            $point = new AlignmentPattern($centerJ, $centerI, $estimatedModuleSize);
            $this->possibleCenters[] = $point;
            if ($this->resultPointCallback != null) {
                $this->resultPointCallback->foundPossibleResultPoint($point);
            }
        }
        return null;
    }

}